NORDTEK DANMARK - EI48 - Encapsulated PCB Mount 50/60Hz Transformer - 8.2-13VA - nordtek.dk

Tell a friend Enquiry print

EI48 - Encapsulated PCB Mount 50/60Hz Transformer - 8.2-13VA

Our comprehensive selection of products also includes a series of EI48 safety transformers for PCB mounting.

High-quality encapsulated vacuum potted transformers. Output power from 8.2VA.

  Print Layout - EI48 Transformer   Pin and Transformer Height - EI48 Transformer   EI48 - Encapsulated PCB Mount 50/60Hz Transformer - 8.2-13VA  
 
View from PCB   Solder pins 0.8 mm Ø  - Grid 5 mm


Type Max. Ambient Temperatur Pin Connections Pin Connections DVE * Stack
Height
mm
Case
Height
(H)mm
Weight
g
 EI48-12E/7.../... 70°C/B 6...42V - 8.20 VA 2x6...21V - 2x4.10 VA x nkf 16.8 34.6 290
 EI48-12A/7.../... 70°C/B 6...38V - 9.40 VA 2x6...19V - 2x4.70 VA x nkf 16.8 34.6 290
 EI48-12F/7.../... 70°C/B 6...38V - 10.50 VA 2x6...19V - 2x5.25 VA x bkf 16.8 34.6 290
 EI48-32E/7.../... 70°C/B 6...39V - 9.80 VA 2x6...19V - 2x4.90 VA x nkf 20.5 38.5 335
 EI48-32A/7.../... 70°C/B 6...38V -11.40 VA 2x6...19V - 2x5.70 VA x nkf 20.5 38.5 335
 EI48-32F/7.../... 70°C/B 6...36V - 13.00 VA 2x6...18V - 2x6.50 VA x bkf 20.5 38.5 335
  • Approved to EN 60742
  • Vacuum cast
  • Two chamber coil
  • Safety class II
  • Protective system IP 00
  • Conditionally short-circuit proof (*bkf) through built-in temperature fuse,
    or not short-circuit proof (*nkf)


Note: If using the conditionally short-ciircuit proof transformer type (*bkf), no strip conductors may be guided between the primary connecting pins on the component insertion side, because in this area there is an unprotected live soldering terminal.


Variants available on request.


Top of page