NORDTEK DANMARK - Toroid Transformer 230V, 2xSec, 500VA - nordtek.dk

Tell a friend Enquiry print

Toroid Transformer 230V, 2xSec, 500VA


High quality open style 500VA toroidal transformers with a single 230V a.c. 50/60Hz primary winding.
Twin secondary windings may be connected in series, parallel or used independently.

  Toroid Transformer 230V, 2xSec, 500VA   Schematic - Electrical   Primary: 230V @ 50/60Hz

Secondary: 2 x Vsec @ 250VA Each
Suitable for Series/Parallel connection
  Open wound toroidal transformer  


Part Number Full Load Vsec (V) Rated Current
per Sec (A)
No Load Vsec (V) DC Resistance (Ohms)
@ 25°C
0500P1-2-025 2x25 10.000 2x26.71 2x0.0789
0500P1-2-030 2x30 8.333 2x32.27 2x0.1188
0500P1-2-035 2x35 7.143 2x37.47 2x0.1561
0500P1-2-040 2x40 6.250 2x43.03 2x0.2043
0500P1-2-045 2x45 5.556 2x48.59 2x0.2645
0500P1-2-050 2x50 5.000 2x53.42 2x0.3267
0500P1-2-055 2x55 4.545 2x58.61 2x0.3614

Primary Winding

Input Voltage Range: 230V ± 10% (207V - 253V) @ 50/60Hz
DC Resistance @ 25°C = Approx 2.5 Ohms
Magnetising Current @ 230V = Approx 23.1 mA
Magnetising Current @ 253V = Approx 98.0mA

Losses

Iron Losses 2.36 Watts approx
Copper Losses 37.5 Watts approx

Temperature Class

Winding Wire (Primary & Secondary) - Class H (180°C)
Insulation between input and output - Class B (130°C)
Connection lead insulation - Class A (105°C)

Standards

Approved to UL506: File E215495
Approved to EN61558 : KEMA Certificate 2001469
Conforms to EN60065, VDE0550, BS415.

Physical Data

Approximate Dimensions:
Diameter 136mm - (Measured away from lead-out bulge; Allow extra 4mm at leads.)
Height 60mm

Approximate Weight:
3.50 Kg

Terminations

Primary:
Solid copper conductors (extension of winding wire), insulated over their entire length with PVC tubing. Double-insulated over entire length with Class A PVC tubing. 150mm Long, 10mm tinned ends.

Secondary:
Solid copper conductors (extension of winding wire), insulated over their entire length with PVC tubing. 150mm Long, 10mm tinned ends.

Mounting Hardware

Each transformer is supplied with a mounting kit, comprising: 2 pieces of Neoprene Insulating discs, 1 piece of Dished Steel Washer



See other power variants here: 230V, 2xSec, 15-1000VA

Top of page